Genuine Original Hunter Replacement Remote Control #99122
For Hunter Ceiling Fans
This is a direct replacement for remote #s: 99122 or 99123
Wireless receiver not included
Requires 3V CR2032 Battery (included)
FCC ID: IN2TX41
FREQ: 434 MHz
Part #K0474 must match for compatibility. Please inquire if you're not sure.
Note: The remote must be paired before the fan will operate.
Turn off the breaker that powers the fan. Leave power off for 1 minute and then turn back on.
Within 3 minutes of restoring power to the fan, press both the Fan Off button and the High button for at least 4 seconds. Your fan will turn on low to indicate successful syncing. If it does not, turn off power to your fan, wait 1 minute then try again. If using the transmitter with multiple fans, repeat this process for each fan.
If fan is a pull-chain model, please make sure that pull-chain control is set to High speed for remote to work correctly.